An excellent way to offset your dependence upon fossil fuels is to have a solar panel installed. It is essential that you set up the system correctly. A professional is the best choice. They can ensure that safety is maintained and that the system works correctly.
Before you start installing solar panels, you need to make sure that your roof can withstand the weight. If it can't, you may need to hire a roofing contractor to inspect your roof. This may take up to a week. Set up a schedule if you are allowed to install the panels on the roof.
You'll also need to inspect your roof. A solar panel installation isn't as difficult as you might think. Most residential homeowners install panels on their roofs. It is also necessary to install scaffolding. This will keep you safe as you work.
Before you start your solar panel installation, check with your state's electrical board to see if you require a license. A reputable solar installer is recommended if you need one. It's worth speaking with them about their experiences and how they'll determine the right amount of solar panels for you. It's a good idea to get multiple quotes so you can compare prices and negotiate the best deal.
To mount your panels, you will also need to connect the panels to your house's control panels. Installing a fuse combiner will allow you to wire your panels together. Installing a breaker panel or backfeed breaker is also necessary. This will allow you to connect your system with your local utility. You may also need rewire some circuits.
You'll need test each wire to ensure that your solar panel installation is working properly. It is also important to ensure that the battery voltages aren't too high. This can be done with a meter. You can check for any problems with a meter.
When you're installing your solar panels, you'll need to make sure that you follow the manufacturer's instructions. If you don't follow these instructions, you could end up with a power leak. Also, it is important to insulate the panels to prevent power leaks.
Also, ensure that you don't allow the panels to lift. This can be done by using brackets or bolts to mount your panels. You can also use a flashing mount to support the solar panels. You will need to place these mounts at least four feet apart. You can also install a ground framework, which isn't a solar panel and functions like a direct mount. These mounts should be installed on a level ground, free from trees and other obstructions.